Monday, July 25, 2011

Beaded Sultan Bead Tutorial - Part 2

This is the continuation of the Sultan's Turban beaded bead as promised.
(Click Here for Part One of tutorial)

Row 4.) Pick up 1 seed bead, one 4 mm bead, 1 seed bead, one 4mm bead and 1 seed bead (this first group will be the only one that has 3 seed beads and two 4mm beads in it).  See photo # 21.
Go back through your 6 mm bead and then through the 6mm bead next to it.  See photo #22.
Pick up 1 seed bead, one 4 mm bead and 1 seed bead.  Pass needle down through the 4mm bead and the seed bead below it on the previous group made.  See photo #23
Now go back through the 6 mm bead  that you just exited and continue through the 6mm bead next to it.  Again pick up 1 seed bead, one 4 mm bead and 1 seed.  Pass needle down through the 4mm bead and the seed bead like you did in photo #23 and then back through the 6 mm bead and on through the next 6 mm bead. 

Repeat this pattern around row 4 until you reach the 8th and final 6mm bead, pass needle through this bead.  Photo #26 is bottom of bead so it appears that needle is going through bead from right to left but if the bead is flipped over, the needle would really be going from left to right.

At this point you will notice that you have a seed bead followed by a 4mm bead on each side of this last 6mm bead therefore you do not have to add these beads (see photo # 25).  
Pass needle through the seed bead and 4 mm bead that are a part of the 1st group made, now pick up 1 seed bead and go down through the 4mm bead and seed bead made in the last group ( this seed bead connects this row and completes this pattern).  Photo 27a shows the tip of the needle as gold colored and lets you know the direction of needle through these beads.

Photo # 27 b shows bead from bottom view, note again that needle direction is reversed when viewing from this perspective.
 Pass needle once again through the 6mm bead (Photo # 27 above )
Then up through the 4mm bead and the seed bead of that first group (photos # 28 & 29)  putting you into position to begin row 5. 



NOTE : as you make this round you will notice a web of thread is formed between the larger 6mm beads. Do not be concerned as this will be addressed later.

Row 5.)  This row will be work like row two, the only difference is that row 2 forms a flatter snowflake shape while this row will be pulled up into a cone-like shape. 
Pick up 3 seed beads, go back through the base seed bead and then through the next base seed bead.   (Photo # 31)

Pick up 2 seed beads pass needle down through the side seed bead of the picot just formed and return through your base seed bead and then over through the next base seed bead.   (Photo # 32)
Since you're not working this flat it may be hard to keep track of your base seed beads, be sure to keep track making sure that you've created a picot above 7 of the base seed beads.   (Photo # 33)

When there is only one seed bead remaining, the 8th one, pass needle through it and notice that this last bead is flanked on both sides by beads and only needs 1 bead to complete the picot. (see X in photo 34)

Bring needle up through the side seed bead of the 1st picot made (photo # 35)

Pick up 1 seed bead and pass needle through the side seed bead of the last picot made (photo # 36). Now go back through the base seed bead.
You have finished the last picot in row 6, to finish this row off bring your needle back up through the side seed bead of the first picot made and then through each of the 8 center seed beads of each picot. This will close up the final row.  (photo # 37)
Work your way down through the seed beads to reach the closest 4mm bead, go through the 4mm bead and the seed bead next to it, pick up 3 seed beads and go across and through the seed bead and 4 mm bead directly across from the beads you've just exited (this will cover up the thread webbing between the larger 6mm beads).  (photo #38)
Go through a seed bead next to the 4mm bead to cross over to the adjacent 4mm bead, pass needle down through this bead and the seed bead below it. Pick up 3 seed beads go through the seed bead and the 4 mm bead directly across from the bead you just exited and repeat this procedure until all spaces between the large 6mm beads have been filled in, covering the threads between them. Finish off your thread as you would in any work and cut.
NOTE:  Sometimes if the seed beads are too small you may need to either pick out larger ones or add one or two in order to fill in this space.
If you are looking for part one of this tutorail please go to: http://abeadersblog.blogspot.com/2011/07/beaded-sultan-bead-tutorial-part-1.html  or
CLICK HERE

24 comments:

  1. What an awesome tutorial. I still say it takes amazing patience to bead like this. It also shows how lazy I am because I avoid such meticulous beading! So I have to admit, I need to really pay attention when I read, because at first I thought it said "Beaded Satan Bead" :) I thought, COOL! hee hee

    ReplyDelete
  2. Wow, what a great tutorial! You make it look so easy but I bet it's not. Very cool design and colors!!

    ReplyDelete
  3. You are so talented! I avoid this kind of beading...it looks so tedious. Thanks for the follow, I'm following you, too!

    ReplyDelete
  4. I am always amazed by beading projects. I could never master these types of projects, but your instruction were easy to follow and I love all the pictures. I think I might have to give it a try again.
    Valerie
    Everyday Inspired

    ReplyDelete
  5. Anna, all I can really say is "WOW!"

    (well, not really, you know I'll say more (He! He!)

    That is truly a thing of beauty. I always marvel at the patience of the beading process and to write everything down and document it so amazingly what a lot of work and dedication :)

    Beautiful colours! Beaders around the world will love you for this :)

    Hope you are having a lovely day, T. :)

    ReplyDelete
  6. WOW! How beautiful!!! I am sharing a tutorial today too, hope you stop by!

    ReplyDelete
  7. Anna...that's insanely beautiful and challenging!! OMG...truly incredible!!

    I love the aqua hue...lovely.

    Have a great Wednesday!

    ReplyDelete
  8. Excellent tutorial! I am making a note to feature it on my blog! Pearl

    ReplyDelete
  9. Holy crow! That's amazing. You should be sending these to Bead & Button magazine and the like!

    ReplyDelete
  10. Gracias por tan estupendo tutorial Besos

    ReplyDelete
  11. I have always wanted a tutorial for a beautifull beaded bead like this one.
    Thank You SOooooo Much for being very generous and sharing your wonderfull work.
    Blessings and (((HUGS))) Halina in Australia

    ReplyDelete
  12. Un tutorial magnifico, muchas gracias por compartirlo.

    ReplyDelete
  13. WOW! and WOW!
    What a lot of work you put into that. You are awesome. Thank you.

    ReplyDelete
  14. You are the bomb and I am so going to make one of these to show you just how awesome your tutorial is!!!!!!

    ReplyDelete
  15. I've made this bead before by following the pictures. I also do not read Hungarian and the English translation left a lot to be desired.

    I wrote myself a step by step pattern and illustrated with pictures taken of each step.

    I like the bead too without the RAW ends, instead slipping them on a cord and using other beads as spacers or even bead caps and cones on each side.

    Have fun and let your Muse guide you.

    ReplyDelete
  16. Anonymous - Great idea. Without the finishing cone of tiny seed beads this beaded bead would have a large enough hole to slide on a cord. Thank you for suggesting that. :)

    ReplyDelete
  17. Excellent directions, thank you! I am new to beads but think I can follow along just fine!

    ReplyDelete
  18. wow, great bead & how to! Even being brand new at this, I want to try it! Thank you!

    ReplyDelete
  19. Can you tell me where part 1 of the tutorial is?

    ReplyDelete
  20. Hi Anonymous - I have added a link to the first part of this tutorial at both the beginning of Part II and at the end. One can also go to that tutorial by scrolling down and looking at my past blog posts, listed in the far right hand column on my blog pages - there you will find part 1 listed under 2011 posted back in July.

    I would have been happy to contact you personally (via blog or email) but since your comment is anonymous I've no way to relay this message other than by posting a reply here on my blog. Hope you'll return and discover the important Part I of this tutorial. :)

    ReplyDelete
  21. Thank you so much for taking the time to write up the recipe for this delicious bead!!

    ReplyDelete
  22. What do you mean, you don't know Hungarian? I think you did a great "translation". Can't wait to try it out.

    Carol

    ReplyDelete
  23. Awesome! Just made one and it was very easy to follow your directions! Thanks so much!

    ReplyDelete
  24. Thank you for the awesome tutorial, haven't tried yet, but next on my list to do x

    ReplyDelete

Nothing makes me happier than to hear from those who have dropped by my blog for a visit. I love hearing from you.

Related Posts Plugin for WordPress, Blogger...